Your roof, restored.
Protection, renewed.
Professional spray-applied silicone roof coating and flat-roof restoration, with the repairs that make the finish count.
Stonebridge repairs structural damage, replaces moisture-affected roof layers and prepares the surface before applying the silicone system. One coordinated scope, from the work beneath the roof to its renewed weather protection.
Los Angeles & Southern California · Homes, multifamily & commercial properties
Repair where it matters.
Renew the whole surface.
A restoration brings repairs, preparation and a new protective coating together. The result is a roof cared for as a complete system.
Sound portions of the existing assembly can stay in service while affected areas are rebuilt. A professionally applied silicone finish then provides a continuous weather-resistant surface across the prepared roof.
Renew weather protection
Silicone roof coatings provide a flexible, UV-resistant protective surface. Seams, flashings and penetrations receive dedicated treatment as part of the restoration.
Keep what still performs
Retaining sound roof areas can reduce the removal work involved in a complete tear-off. The assessment identifies what can stay and what should be renewed.
Repairs and coating, together
Your proposal connects the underlying repairs with the finish, so you can understand the work, its sequence and the protection being installed.
From a worn roof
to renewed protection.
Structural damage and trapped moisture are conditions we address before coating.
Stonebridge completes the required structural repairs. Where moisture is trapped, we remove the affected roofing layer and install new compatible material. The silicone is applied to a repaired, dry and prepared roof.
Get beneath the problem.
We identify affected areas and remove wet or deteriorated roofing materials to expose the work beneath them.
Restore a sound base.
We repair structural damage and decking as required, then rebuild the affected roof layers with compatible new material.
Bring the roof together.
We prepare the surface, treat seams and transitions, and apply the silicone system for renewed roof protection.
Conceptual repair sequence, not before-and-after project photography. Cutaways and lifted layers explain the work; actual assemblies and repair areas vary by property.
Start with the roof you have.
We will review its condition and map out the repairs and restoration approach.
A continuous finish.
Care at every connection.
The open roof is only part of the work. Explore how we connect the coating to the details around it.
01 / The roof surface
Cleaning, drying and surface preparation create the base for adhesion. Primers, coating coverage and application passes follow the selected system so the finish forms a continuous protective surface.
02 / Pipes & equipment
Penetrations and equipment curbs receive compatible flashing repairs, reinforcement and sealant details before the surrounding field is coated.
03 / Edges & transitions
Parapets, seams, edges and changes in material are prepared and detailed to maintain continuity where the roof meets the rest of the building.
04 / Drains & water flow
Drain connections are repaired and detailed while keeping the flow path open. Drainage improvements identified in the scope are addressed alongside the restoration.
See the condition.
Understand the solution.
You deserve to understand what your roof needs—and what the work will accomplish.
We review the surface, seams, flashings, drainage and signs of moisture to build a practical repair and restoration scope. Structural repairs and replacement of wet roof layers are addressed before the silicone finish is applied.
That gives you a connected plan for the work beneath the surface and the protection above it.
Know what happens next.
From the first assessment to the finished coating, the work follows a clear sequence.
Professional spray application brings an even, controlled application method to broad roof areas. Preparation, detail work, coverage checks and cure conditions make that application part of a complete restoration.
- 01
Assess & plan
Review the roof, leak history, moisture, drainage and access. Define repairs, material compatibility and the restoration scope.
- 02
Repair & renew
Complete structural and decking repairs. Remove affected roof layers and install compatible new materials where needed.
- 03
Prepare & detail
Clean and prepare the surface. Address seams, flashings, penetrations and transitions; prime where the system requires it.
- 04
Spray & inspect
Apply the silicone system with controlled passes, protecting adjacent areas and checking the specified coverage and finish.
- 05
Care for the result
Review the completed work, agreed project records and maintenance guidance for the restored roof.
Answers for your
restoration project.
You do not need to diagnose the roof before contacting us. Tell us what you have noticed and we will discuss the next step.
Can you restore a roof that needs repairs?
Yes. Repairs are part of Stonebridge’s restoration approach. We address structural damage and decking repairs before coating. The assessment establishes the repair scope, the areas to rebuild and the appropriate silicone system. Any required engineering or permits are coordinated for the repair scope.
What happens if there is moisture beneath the roof?
We identify the affected area, remove the moisture-affected roofing layer and install new compatible roofing material before coating. If insulation, decking or other components are affected, they are included in the repair review. The rebuilt area is prepared and tied into the surrounding roof.
Why choose silicone roof coating?
Silicone provides a flexible, UV-resistant weathering surface and can renew the protection of a properly repaired and prepared roof. White systems also reflect sunlight at the roof surface. The product selected for your roof determines its performance characteristics; any energy savings depend on the building and operating conditions.
Does restoration mean removing the entire roof?
Restoration can preserve sound portions of the existing assembly while replacing affected areas. We establish the removal and repair work after assessing the roof, moisture and material compatibility. If the findings call for more extensive reconstruction, your proposal will explain that scope clearly.
What roof types can be considered?
Flat and low-slope roofs with modified bitumen, built-up roofing, certain single-ply membranes and existing coatings can be reviewed for restoration. We check the existing material, preparation needs and adhesion requirements to select a compatible approach.
How do I get a price and understand the warranty?
Share the property location, roof concerns and any available photos or plans. The proposal sets out repairs, preparation, coating work and any offered warranty terms. Cost reflects the actual roof and scope. Warranty coverage and duration are confirmed in writing for the selected system and project.
Let’s restore
your roof’s protection.
Tell us about the property. We will help you understand the repairs, restoration work and next steps.
Start with a conversation
A leak, a worn surface or a roof you want to take care of is enough to get started.
- Property location and building type
- What you have noticed and any previous repairs
- Photos or approximate roof area, if available
Bring us the roof scope
Send plans, inspection findings or a scope for coordinated repair and silicone-restoration review.
- Roof plans, existing assembly and known repair areas
- Moisture findings, access and occupancy needs
- Schedule and proposal requirements
Technical references: GAF roof restoration preparation · Gaco roof coating systems. Material selection and installation details are specific to your roof and chosen system.